25
HCD-GNV99D/GNV111D
5. Wait until a hexadecimal number appear.
Manual Adjust
1. Track Balance Adjust:
2. Track Gain Adjust:
3. Focus Balance Adjust:
4. Focus Gain Adjust:
5. Eq Boost Adjust:
6. Iop. ED:
7. TRV. Level:
8. S curve(FE) Level:
9. RFL(PI) Level:
0. MIRR Time:
Change Value
[0]
Return to previous menu
6. Convert data from hexadecimal to decimal using conversion
table.
7. Press
[RETURN]
to return back to previous menu.
8. Press
[0]
to return to Top Menu and power OFF the DVD Player.
[EMERGENCY HISTORY CHECK]
Information of Emergency History.
1. In standby mode, press
[TOP MENU]
,
[CLEAR]
,
?/1
buttons to
enter Remocon Diagnosis Mode.
2. Select “3. Emergency History”.
Emg. History Check
Laser Hours
CD
999h
59min
DVD
999h
59min
1. 01 05 04 04
00 92 46 00
00 00 00 00
00 00 23 45
2. 02 02 01 01
00 A9 4B 00
00 00 00 00
00 00 23 45
[Next]
Next Page
[Prev]
Prev Page
3. Laser Hours
DVD Laser ON time. (Total ON time)
CD Laser ON time. (Total ON time)
4. Emergency History
The history information from last “1” to “10” can be
scrolled with
[NEXT]
button or
[PREV]
button.
5. Error code
Example of Error code
1. 01 05 04 04
00 92 46 00
00 00 00 00
00 00 23 45
6. Error code list
01: Communication error (No reply from syscon)
02: Syscon hung up
03: Power OFF request when syscon hung up
19: Thermal shutdown
24: MoveSledHome error
25: Mecha move error (5 Changer)
26: Mecha move stack error
30: DC Motor adjustment error
31: DPD offset adjustment error
32: TE Balance adjustment error
33. TE Sensor adjustment error
34. TE loop gain adjustment error
35. FE loop gain adjustment error
36. Bad jitter after adjustment
40. Focus NG
42. Focus Layer Jump NG
52. Open kick spindle error
51: Spindle stop error
60: Focus on error
61: Seek fail error
62: read Qdata/ID error
70: Lead In Data Read Fail
71: TOC read time out (CD)
80: Can’t Buffering
81: Unknown media type
7. Error code parameters
Example of Error code
1. 01 05 04 04
00 92 46 00
00 00 00 00
00 00 23 45
This is the detailed contents od error information
8. Laser hours at error happend.
Example of Error code
1. 01 05 04 04
00 92 46 00
00 00 00 00
00 00 23 45
This is Laser hours when an error happaned.
9. How to Clearing laser hours
Press
[DISPLAY]
,
[CLEAR]
buttons in this order.
Both CD and DVD data are cleared.
Emg. History Check
Laser Hours
CD
0h
0min
DVD
0h
0min
1. 01 05 04 04
00 92 46 00
00 00 00 00
00 00 23 45
2. 02 02 01 01
00 A9 4B 00
00 00 00 00
00 00 23 45
[Next]
Next Page
[Prev]
Prev Page
[0]
Return to Top Menuas
Summary of Contents for HCD-GNV111D
Page 101: ...101 HCD GNV99D GNV111D MEMO ...