HCD-EC69/EC79/EC99
17
4
It indicates the operation that is being processed when the trou-
ble has occurred.
It indicates the step number of each processing speci
fi
ed by
3
.
Because the numbers of steps are different in each processing,
this number is different in each processing.
CD FACTORY MODE
Note1:
Do not enter the this mode while any other test mode is in prog-
ress.
Note2:
Do not enter any other test mode while the this mode is in prog-
ress.
Procedure:
1. Press the [
?/1
] button to turn the power on.
2. Press the [FUNCTION] button to select CD function
3. Press three buttons of [
u
], [USB] and [
?/1
] simultaneously.
4. It enters the CD factory mode and the message “FACTORY”
is displayed. When the [CD] button is pressed four times, the
following message (initial display) is displayed.
–X1ON
S character mode setting
Tracking servo setting
RF gain setting
Key Operation:
[CD]:
The display changes in the following order when-
ever the button is pressed.
(Initial display)
fcsAG ** (**: Focus AGC value)
trkAG ** (**: Track AGC value)
RF-AG ** (**: RF AGC value)
[DSGX]:
RF gain setting changes whenever the button is
pressed.
“–”: No gain
fi
xation.
“AL”: Fix to the gain for AL disc.
“RW”: Fix to the gain for RW disc.
[USB]:
Tracking servo setting changes whenever the but-
ton is pressed.
“ON”: Tracking servo ON.
“OFF”: Tracking servo OFF.
[FUNCTION]:
S character mode setting changes whenever the but-
ton is pressed.
“ ”: S character mode OFF.
“S”: S character mode ON.
5. To release from this mode, press three buttons of [
u
], [USB]
and [
?/1
] simultaneously.
