![background image](http://html.mh-extra.com/html/sony/hcd-dx80/hcd-dx80_service-manual_420633014.webp)
14
HCD-DX80
[CD Ship Mode (Memory Clear) ]
• This mode moves the pickup to the position durable to vibra-
tion. Use this mode when returning the set to the customer after
repair.
Procedure:
1. Press
?
/
1
button to turn the set ON.
2. Press three buttons
x
, ENTER and GAME simultaneously.
3. After the "STANDBY" display blinks six times, a message
“LOCK” is displayed on the fluorescent indicator tube, and the
CD ship mode is set.
[CD Ship Mode (No Memory Clear) ]
• This mode moves the pickup to the position durable to vibra-
tion. Use this mode when returning the set to the customer after
repair.
Procedure:
1. Press
?
/
1
button to turn the set ON.
2. Press CD button and
?
/
1
button simultaneously.
3. After the "STANDBY" display blinks six times, a message
“LOCK” is displayed on the fluorescent indicator tube, and the
CD ship mode is set.
* Tape function
1. When a tape is inserted in Deck B and recording is started, the
input source function selects VIDEO automatically.
When CD SYNC/HI-DUB button is pressed during Rec in
function, ALC is turned on.
2. When
x
button is pressed to stop recording, the Tape (Deck)
B is selected and tape is rewound, tape is rewound using
m
button, tape is stops at around the record-starting position and
playback of the recorded portion of the tape is started. If PAUSE
is inserted even once during recording, tape is rewound to the
position around the PAUSE position and is played back.
3.
When CD SYNC / HI-DUB button is pressed during playback
of Deck B, either normal speed or high speed can be selected
by this button.
* AMS Test Mode
1.
Set TAPE function
2.
Select the desired loop by pressing the PLAY MODE button.
Insert a test tape AMS-110A or AMS-120 to Deck A.
3.
Press the SPECTRUM button to enter the AMS test mode.
4.
After a tape is rewound first, the FF AMS is checked, and the
mechanism is shut off after detecting the AMS signal twice.
5.
Then the REW AMS is checked and the mechanism is shut off
after detecting the AMS signal twice.
6.
When the check is complete, a message of either OK or NG
appears.
* To return to normal mode again.
1.
When you want to exit this mode, press the
?
/
1
button.
2. The cold reset is enforced at the same time.
[VACS ON/OFF Mode]
• This mode is used to switch ON and OFF the VACS (Variable
Attenuation Control System).
Procedure:
Press the ENTER and SPECTRUM buttons simultaneously. The
message “VACS OFF” or “VACS ON” appears.
[CD Service Mode]
• This mode can run the CD sled motor freely. Use this mode, for
instance, when cleaning the pickup.
Procedure:
1. Press
?
/
1
button to turn the set ON.
2. Select the function “CD”.
3. Press three buttons
x
, ENTER , and OPEN/CLOSE simul-
taneously.
4. The CD service mode is selected.
5. With the CD in stop status, press
M
button to move the pickup
to outside track, or press
m
button to inside track.
6. To exit from this mode, perform as follows:
1) Move the pickup to the most inside track.
2) Press
?
/
1
button to turn the set OFF.
Note:
• Always move the pickup to most inside track when exiting from
this mode. Otherwise, a disc will not be unloaded.
• Do not run the sled motor excessively, otherwise the gear can be
chipped.
+
–
Summary of Contents for HCD-DX80
Page 4: ...4 HCD DX80 SECTION 1 GENERAL This section is extracted from instruction manual ...
Page 5: ...5 HCD DX80 ...
Page 6: ...6 HCD DX80 ...
Page 20: ...20 HCD DX80 MEMO ...