16
HCD-DV2D
DVD SECTION
[GENERAL DESCRIPTION]
The Test Mode allows you to make diagnosis and adjustment easily
using the remote commander and monitor TV. The instructions,
diagnostic results, etc. are given on the on-screen display (OSD).
[Configuration of Test Mode]
1. STARTING TEST MODE
1. Press the
?
/
1
button to turn the power on, and set the function
to DVD.
2. While pressing the
x
and
Z
button at the same time, rotate
the
[]
knob clockwise to enter the test mode.
3. The message “SERVICE IN” appears on the fluorescent
indicator tube, and the message Test Mode Menu appears on
the monitor screen as follows.
1. To execute each function, press the
m
“R” or
M
“R” button
to select the desired menu.Then press the ENTER “R” button.
2. To exit the Test Mode, select the menu “Reset And Exit” and
press the ENTER “R” button.
2. SYSCON Diagnosis
1. Select the menu “SYSCON Diagnosis” and press the
ENTER “R” button.
2. Press the
m
“R” or
M
“R” button to select the desired menu.
3. To exit the Test Mode, press the
O
RETURN “R” button.
2-1. MPEG Test MENU
1. Select the menu “MPEG Test Menu” and press the
ENTER “R” button.
2. Press the
m
“R” or
M
“R” button to select the desired menu.
3. To exit the Test Mode, press the
O
RETURN “R” button.
[MPEG Test]
[Check DSP]
[Check Flash]
[Check EEPROM]
[Check SDRAM]
[FRONT PANEL Test]
[SERVO Test]
[SYSCON Diagnosis ]
[Version Information ]
[ SERVICE MODE TEST SEQUENCE ]
[Panel Key Test]
[VFD Test]
[Remote Key Test]
ENTER "R"
ENTER "R"
ENTER "R"
ENTER "R"
ENTER "R"
ENTER "R"
ENTER "R"
ENTER "R"
ENTER "R"
RETURN "R"
RETURN "R"
RETURN "R"
RETURN "R"
RETURN "R"
RETURN "R"
RETURN "R"
ENTER "R"
RETURN "R"
ENTER "R"
RETURN "R"
ENTER "R"
RETURN "R"
RETURN "R"
RETURN "R"
"R"
"R"
"R"
"R"
"R"
"R"
"R"
"R"
SERVICE MODE TEST SEQUENCE
DVD Service Mode
SYSCON Diagnosis
Version Information
Reset And Exit
SYSCON Diagnosis
MPEG T
FRONT PANEL
est
SERVO Test
Test
MPEG Test Menu
Check DSP
Check Flash
Check SDRAM
Check EEPROM
