
– 14 –
• Display when ended abnormally
When the tape deck is abnormal:
The state when ended abnormally is displayed.
The contents of display are the same as that during aging.
When the CD player is abnormal:
A message indicating that errors such as “CD MEC ERR” have occurred.
Check the error contents in the following error history display mode.
Error History Display Mode
Mode which enables the history of error occurring in the CD player to be checked.
Execute this mode after ending the aging mode.
Procedure:
1. Press the
1
/
u
button to turn the set ON.
2. Press the three buttons
t
/CLOCK SET , ENTER , and CD SYNCHRO simultaneously.
3. A message such as “EMC@@EDC**” is displayed.
@@ : Number of mechanical errors (Up to three past errors)
**
: Number of errors (NO DISC ERROR) which occurs after chucking (Up to three past errors)
4. When checking the history of mechanical errors, press the PLAY MODE button. When checking errors after chucking, press the
REPEAT button to switch the display.
5. Press the
1
/
u
button to end and turn the set OFF.
6. To erase the error history, perform COLD reset.
(Press the three buttons
t
/CLOCK SET , ENTER , and DISC 1 simultaneously.
• Viewing the mechanical error history display
(Switch the history by pressing the PLAY MODE button.)
Display
E@@M#*****
@@ : Error number. 00 is the newest.
#
: Operating state of table
0
: Currently in the INITIAL mode
7
: Currently rotating to the right
8
: Currently rotating to the left
A
: Currently chucking down
B
: Currently chucking up
*
: Invalid
• Viewing the NO DISC ERROR history display
(Switch the history by pressing the REPEAT button.)
Display
E@@D##$$%*
@@ : Error number. 00 is the newest
##
: Error contents
01: Focus error
02: GFS error
03: Setup error
$$
: Retries
00: NO DISC is determined without attempting chucking
retry
02: NO DISC is determined after chucking retry.
%
: State when determined as NO DISC
1
: When stopped
2
: At setup
3
: At TOC READ
4
: When accessing
5
: When playing
6
: When pausing
7
: When manual searching (during play)
8
: When manual searching (during pausing)
*
: Invalid
Summary of Contents for HCD-DR8AV
