![background image](http://html.mh-extra.com/html/sony/hcd-cp33/hcd-cp33_service-manual_420598022.webp)
22
“CPLAY MID”
n
“CPLAY OUT”
n
“CPLAY IN”
“CPLAY MID”
n
“CPLAY OUT”
n
“CPLAY IN”
5-5-1. Operating the Continuous Playback Mode
1. Entering the continuous playback mode
1
Set the disc in the unit. (Whichever recordable discs or discs for playback only are available.)
2
Press the
.
(R) and
>
(R) buttons and display “CPLAY MODE”.
3
Press the ENTER/YES (R) button to change the display to “CPLAY MID”.
4
When access completes, the display changes to “C1 =
AD =
”.
Note :
The numbers “ ” displayed show you error rates and ADER.
2. Changing the parts to be played back
1
Press the ENTER/YES (R) button during continuous playback to change the display as below.
When pressed another time, the parts to be played back can be moved.
2
When access completes, the display changes to “C1 =
AD =
”.
Note :
The numbers “ ” displayed show you error rates and ADER.
3. Ending the continuous playback mode
1
Press the MENU/NO (R) button. The display will change to “CPLAY MODE”.
2
Press the MD
Z
button to remove the disc.
Note :
The playback start addresses for IN, MID, and OUT are as follows.
IN
40h cluster
MID
300h cluster
OUT
700h cluster
5-5-2.
Operating the Continuous Recording Mode (Use only when performing self-recording/palyback check.)
1. Entering the continuous recording mode
1
Set a recordable disc in the unit.
2
Press the
.
(R) and
>
(R) buttons and display “CREC MODE”.
3
Press the ENTER/YES (R) button to change the display to “CREC MID”.
4
When access completes, the display changes to “CREC (
)” and “REC” indicator lights up.
Note :
The numbers “ ” displayed shows you the recording position addresses.
2. Changing the parts to be recorded
1
When the ENTER/YES (R) button is pressed during continuous recording, the display changes as below.
When pressed another time, the parts to be recorded can be changed. “REC” indicator goes off.
2
When access completes, the display changes to “CREC (
)” and “REC” indicator lights up.
Note :
The numbers “ ” displayed shows you the recording position addresses.
3. Ending the continuous recording mode
1
Press the MENU/NO (R) button. The display changes to “CREC MODE” and “REC” indicator goes off.
2
Press the MD
Z
button to remove the disc.
Note 1 :
The recording start addresses for IN, MID, and OUT are as follows.
IN
40h cluster
MID
300h cluster
OUT
700h cluster
Note 2 :
The MENU/NO (R) button can be used to stop recording anytime.
Note 3 :
Do not perform continuous recording for long periods of time above 5 minutes.
Note 4 :
During continuous recording, be careful not to apply vibration.
5-5-3. Non-Volatile Memory Mode (EEP MODE)
This mode reads and writes the contents of the non-volatile memory.
It is not used in servicing. If set accidentally, press the MENU/NO (R) button immediately to exit it.
Summary of Contents for HCD-CP33
Page 80: ...HCD CP33 MEMO ...
Page 83: ...MEMO HCD CP33 ...