![background image](http://html.mh-extra.com/html/sony/hcd-bx7/hcd-bx7_service-manual_420588006.webp)
6
6
Step 1: Hooking up the system
(continued)
To attach the front speaker pads
Attach the supplied front speaker pads to the
bottom of the speakers to stabilize the
speakers and prevent them from slipping.
Positioning the speakers
Before you connect them, determine the best
location for your speakers.
1
Place the front speakers at an angle
of 45 degrees from your listening
position.
2
Place the surround speakers facing
each other at about 60 to 90 cm
above your listening position.
E
e
e
E
Front
speaker
(L)
Front
speaker
(R)
Surround
speaker
(L)
Surround
speaker
(R)
45º
Surround
speaker
60 to 90 cm
Inserting two size AA (R6)
batteries into the remote
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates
the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
When carrying this system
Do the following to protect the CD
mechanism.
1
Make sure that all discs are removed from
the unit.
2
Hold down CD and then press
?/1
so that
“LOCK
” appears in the display.
3
Unplug the AC power cord.
7
1
Press CLOCK/TIMER SET.
The hour indication flashes.
2
Press
.
or
>
repeatedly to set
the hour.
3
Press ENTER.
The minute indication flashes.
4
Press
.
or
>
repeatedly to set
the minute.
5
Press ENTER.
The clock starts working.
Tip
If you
’ve made a mistake, start over from step 1.
To change the time
The previous explanation shows you how to set the
time while the power is off. To change the time
while the power is on, do the following:
1
Press CLOCK/TIMER SET.
2
Press
.
or
>
repeatedly to select
SET CLOCK.
3
Press ENTER.
4
Perform steps 2 through 5 above.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
Step 2: Setting the
time
Y
ou must set the time before using the timer
functions.
T
he clock is on a 24-hour system for the
E
uropean model and a 12-hour system for
o
ther models.
T
he 24-hour system model is used for
illustration purposes.
mM
.>
YX
x
x
NX
1
3,5
2,4
This section is extracted from
instruction manual.