HBD-TZ140
12
2-7. DVD MECHANISM DECK (F-8829F1)
Note 1:
When disconnecting the
fl
exible cable of optical pick-up block, solder the short-land.
3
Solder the short-land.
2
connector
(CN301)
<Fig. A>
4
flexible cable
(CN300)
7
Remove the DVD mechanism
deck (F-8829F1) block in the
direction of the arrow.
8
DVD mechanism deck block
(F-8829F1)
1
Cut two wire ties.
<Fig. A>
<Fig. A>
Note 3:
When assembling the optical
pick-up block, remove the solder
of short-land after connecting the
flexible
cable.
Note 2:
In reassembling, use new wire tie
to fasten the clamp same as before.
5
two screws
(BVTT3
u
7)
5
two screws
(BVTT3
u
7)
6
claw
6
claw
– Rear right view –
Wire setting
wire tie
wire tie
tray
CONTROL board
MAIN board
POWER board
DVD mechanism deck
(CMS-S76RFS3G)
Bring the slack part to the front side.
Check that this portion is not slack.
This portion must not touch the POWER board.
This portion must not touch the tray.
Summary of Contents for HBD-TZ140
Page 33: ...MEMO HBD TZ140 33 ...
