57
Advanced operations
0:00:00
ZERO SET
MEMORY
0:00:00
1
2
4
3
Using the Remote Commander, you can easily go back to the desired point on a tape
after playback.
(
1
)
During playback, press ZERO SET MEMORY at the point you later want to locate.
The counter shows “0:00:00” and “ZERO SET MEMORY” appears on the LCD
screen or in the viewfinder.
(
2
)
Press
p
when you want to stop playback.
(
3
)
Press
0
to rewind or press
)
to fast-forward the tape to the counter’s zero point.
The tape stops automatically when the counter reaches approximately zero. “ZERO
SET MEMORY” disappears and the time code appears.
(
4
)
Press
(
.
Note on the tape counter
There may be a discrepancy of several seconds from the time code.
Notes on ZERO SET MEMORY
• When you press ZERO SET MEMORY, the counter’s zero point is memorized. Press
ZERO SET MEMORY again before step 3 to cancel the memory .
• ZERO SET MEMORY may not function when there is a blank portion between
pictures on a tape.
• ZERO SET MEMORY functions in recording standby mode.
Returning to a pre-registered position
