Sony Handycam RMT-708 Service, Service Manual, Page: 124 / 240

5-38
3-1-6. Input/Output Level and Impedance
Video input/output
Phono jack, 1 Vp-p, 75
Ω
,
unbalanced, sync negative
S video input/output
4-pin mini DIN
Luminance signal:
1Vp-p, 75
Ω
, unbalanced, sync negative
Chrominance signal:
0.286Vp-p 75
Ω
, unbalanced (NTSC)
0.3Vp-p 75
Ω
, unbalanced (PAL)
Audio input/output
Phono jack,
Input:
–7.5 dBs, input impedance more
than 47 k
Ω
Output: –7.5 dBs, (at load impedance 47 k
Ω
),
impedance less than 2.2 k
Ω
3-1-7. Recording Mode (Standard 8/Hi8) switching
The record mode (Standard 8/Hi8) of this unit switches as shown in
the following table. The playback mode (Standard 8/Hi8) switches
automaticaly according to the recording mode of the tape played
back.
3-1-8. Service Mode
Additional note on adjustment
Note:
After the completion of the all adjustments, cancell the
service mode by either of the following ways.
1) Unplug the main power supply and remove the lithium battery.
(In this case, date and time and menu setting have been set by
users are canceled. Perform resetting.)
2) After data on page: D and F is restored, select page: 0, address:
01, and return the data to 00. And when data on page: 3 is changed,
return the data to the original condition.
1. Test mode setting
Set/release each test mode. Select page: 0, address: 01, and set data:
01 before setting the data of page D and F.
* For page D and F, the data set will be recorded in the nonvolatile
memory by pressing the PAUSE button on the adjusting remote
commander. Take note that, in this case, the test mode will not
be released even if the main power has been turned off (8.4 Vdc).
* Be sure to return this address data to 00 after completing
adjustments/repairs and press the PAUSE button of the adjusting
remote commander. And select page: 0, address: 01, and set data:
00.
Tape Used
ME
Hi8 MP
MP
Recording Mode
Hi8
Standard 8
Function
Normal
Camera power ON
VTR power ON
VTR power ON
Data
00
01
02
03
Address 2A Page F
Address 10 Page D
Normal
Test mode
Various emergency prohibitions and releases
Drum emergency, capstan emergency, loading motor
emergency, reel emergency, tape top and end, DEW
detection
00
01
Function Data