manualshive.com logo in svg

Sony Handycam DCR-VX1000, Operation Manual

Share
Download
Sony Handycam DCR-VX1000 Operation Manual Download Page 19

19

Advanced Operations

WARNING

AC power cord must only be changed at qualified service shop.

Precautions

• The set is not disconnected from the AC power source as long as it is connected to the wall outlet,

even if the set itself has been turned off.

• To prevent accident from a short circuit, do not come into contact with the terminal inside the

shutter at the rear of the camcorder.

Notes on the POWER lamp

• The POWER lamp will remain lit for a while even if the unit is unplugged after use. This is normal.
• If the POWER lamp does not light, disconnect the AC power cord. After about one minute, try again.

Using a Car Battery

Use the DC-V515/V700 pack (not supplied).  Connect the cord of the DC pack to the cigarette lighter
socket of a car (12 V or 24 V).  Connect the DC pack in the same way as the AC power adaptor.
Use the connecting cord supplied with this camcorder.

Summary of Contents for Handycam DCR-VX1000

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands