Sony Handycam DCR-TRV940, Service Manual

Page: 184 / 265

176
You can protect selected images to prevent accidental erasure of important images.
Before operation
Insert a “Memory Stick” into your camcorder.
( 1 )
Set the POWER switch to MEMORY/NETWORK (DCR-TRV950 only) or VCR.
Make sure that the LOCK switch is set to the further side (unlock position).
( 2 ) Press INDEX on your camcorder to display the index.
( 3 )
Press - MARK. The screen to protect the image appears.
( 4 )
Press the image you want to protect. A “ - ” appears on the protected image.
To return to FN
Press EXIT.
To cancel image protection
Press the image you want to cancel image protection in step 4 again. The “ - ”
disappears.
Note
Formatting erases all information on the “Memory Stick,” including the protected
image data. Before formatting a “Memory Stick,” check its contents.
If the write-protect switch on the “Memory Stick” is set to LOCK
You cannot protect images.
Preventing accidental erasure
– Image protection
2
INDEX
3,4
1 2 3
4 5 6
EXIT RET.
-
MARK
1 / 40
1 2 3
4 5 6
EXIT DEL MARK - MARK
T t
-
2 / 40
T t
- MARK