Recor
d
ing
Recording
39
To adjust the focus automatically
Follow steps 1 and 2, then touch [AUTO] in step
3. Or set [FOCUS] to [AUTO] (p. 39).
b
Note
• You cannot use the SPOT FOCUS function together
with [PROGRAM AE].
z
Tip
• If you set [SPOT FOCUS], [FOCUS] is
automatically set to [MANUAL].
Adjusting the focus manually
You can adjust the focus manually according
to the recording conditions.
Use this function in the following cases.
– To record a subject behind a window covered
with raindrops.
– To record horizontal stripes.
– To record a subject with little contrast
between the subject and its background.
– When you want to focus on a subject in the
background.
– To record a stationary subject using a tripod.
1
Touch
during recording or in
the standby mode.
2
Touch [FOCUS].
If the item is not displayed on the screen,
touch
/
. If you cannot find it, touch
[MENU], and select it from the
(CAMERA SET) menu.
3
Touch [MANUAL].
appears.
4
Touch
or
to sharpen focus.
: To focus on close subjects.
: To focus on distant subjects.
9
changes to
when the focus cannot be
adjusted any further.
9
changes to
when the focus cannot be adjusted any
closer.
Tips for focusing manually
• It is easier to focus on the subject when
you use the zoom function. Move the
power zoom lever towards T (telephoto)
to adjust the focus, and then, towards W
(wide angle) to adjust the zoom for
recording.
• When you want to record a close-up
image of a subject, move the power zoom
lever towards W (wide angle) to fully
magnify the image, then adjust the focus.
5
Touch .
To adjust the focus automatically
Follow steps 1 and 2, then touch [AUTO] in
step 3.
FOCUS:
AUTO
0:00:00
AUTO
MANUAL
60min
STBY
FOCUS:
MANUAL
OK
0:00:00
AUTO
MANUAL
60min
STBY
