Sony Handycam DCR-HC30E Operation Manual Download Page 16

Page: 16 / 148

Getting started

Step 2: Charging the
battery pack

You can charge the battery by attaching the
“InfoLITHIUM” battery pack (P series) to
your camcorder.

Notes

• You cannot use batteries other than the

“InfoLITHIUM” battery pack (P series) (p. 128).

• Do not short-circuit the DC plug of the AC Adaptor

or battery terminals with any metallic objects. This
may cause a malfunction.

• Use a nearby wall socket when using the AC

Adaptor. Disconnect the AC Adaptor from the wall
socket immediately if any malfunction occurs.

Attach the battery pack by sliding it in
the direction of the arrow until it
clicks.

With the

mark on the DC plug facing

down, connect the AC Adaptor to the
DC IN jack on your camcorder.

Connect the mains lead to the AC
Adaptor.

Connect the mains lead to the wall
socket.

Slide the POWER switch up to OFF
(CHG).

To the wall socket

DC plug

DC IN jack

Mains lead

AC Adaptor

Battery pack

mark

Summary of Contents for Handycam DCR-HC30E





















































































































































Search results

Summary of Contents for Handycam DCR-HC30E

Reviews:

Sony Handycam DCR-HC30E, Operation Manual, Page: 16 / 148

Search results

Summary of Contents for Handycam DCR-HC30E

Reviews: