Sony Handycam CCD-TRV238, Operation Manual

Page: 64 / 116

Dubbing/Editing
64
10
Point the infrared ray emitter of your
camcorder towards the remote sensor
on your VCR, from about 30 cm (12
in.) away, with no obstructions.
11
Set the VCR to recording pause.
12
Turn the SEL/PUSH EXEC dial to
select [IR TEST], then press the dial.
13
Turn the SEL/PUSH EXEC dial to
select [EXECUTE], then press the dial.
Recording starts on your VCR when the
setting is correct. [COMPLETE] appears
when the [IR SETUP] code test is finished.
Go on to the next step.
When recording fails to start, select another
[IR SETUP] code and try again.
14
Turn the SEL/PUSH EXEC dial to
select [
RETURN], then press the
dial.
[IR SETUP] code list
The following [IR SETUP] codes are recorded
on your camcorder by default. (It is set at “3” as
the default setting.)
Remote sensor VCR
Infrared ray
emitter
Manufacturing
company [IR SETUP] code
Sony 1, 2, 3, 4, 5, 6
Aiwa 47, 53, 54
Akai 50, 62, 74
Alba 73
Amstrad 73
Baird 30, 36
Blaupunkt 11, 83
Bush 74
CGM 36, 47, 83
Clatronic 73
Daewoo 26
Ferguson 76, 83
Fisher 73
Funai 80
Goldstar 47
Goodmans 26, 84
Grundig 9, 83
Hitachi 42, 56
ITT/Nokia Instant 36
JVC 11, 12, 15, 21
Kendo 47
Loewe 16, 47, 84
Luxor 89
Mark 26*
Matsui 47, 58*, 60
Mitsubishi 28, 29
Nokia 36, 89
Nokia Oceanic 89
Nordmende 76
Okano 60, 62, 63
Orion 58*, 70
Panasonic 16, 78
Philips 83, 84, 86
Phonola 83, 84