Sony Handycam CCD-TR930 Page 49 Operating Instructions Manual Download | Manualshive

Page: 49 / 72

background image

49

Additional Information

Tips for using the battery pack

This section shows you how you can get the most out of your battery pack.

Preparing the battery pack

Always carry additional batteries

Have sufficient battery pack power to do 2 to 3 times as much recording as you have
planned.

Battery life is shorter in a cold environment

Battery efficiency is decreased, and the battery will be used up more quickly, if you are
recording in a cold environment.

To save battery power

Turn STANDBY down when not recording to save battery power.
A smooth transition between scenes can be made even if recording is stopped and
started again. While you are positioning the subject, selecting an angle, or looking
through the viewfinder lens, the lens moves automatically and the battery is used. The
battery is also used when a tape is inserted or removed.

When to replace the battery pack

While you are using your camcorder, the remaining battery indicator in the viewfinder
decreases gradually as battery power is used up. The remaining time in minutes also
appears.

When the remaining battery indicator reaches the lowest point, the

i

indicator appears

and starts flashing in the viewfinder.
When the

i

indicator in the viewfinder changes from slow flashing to rapid flashing

while you are recording, slide the POWER switch to OFF on the camcorder and replace
the battery pack. Leave the tape in the camcorder to obtain a smooth transition between
scenes after the battery pack has been replaced.

Notes on the rechargeable battery pack

Caution

Never leave the battery pack in temperatures above 140°F (60°C), such as in a car
parked in the sun or under direct sunlight.

The battery pack heats up

During charging or recording, the battery pack heats up. This is caused by energy that
has been generated and a chemical change that has occurred inside the battery pack.
This is not cause for concern and is normal.

«
...
47
48
49
50
51
...
»

Summary of Contents for Handycam CCD-TR930









































































Reviews:

No comments

Related manuals for Handycam CCD-TR930

Brand: MICAMCORDER Pages: 19

Brand: Pro4Tech Pages: 36

Brand: Samsung Pages: 75

Brand: Philips Pages: 3

Brand: Philips Pages: 3

Brand: Philips Pages: 3

Brand: Philips Pages: 3

Brand: Philips Pages: 3

Brand: Philips Pages: 3

Brand: Philips Pages: 3

Brand: Philips Pages: 3

Brand: Philips Pages: 3

Brand: Philips Pages: 18

VideoTracer DVT3120

Brand: Philips Pages: 26

Brand: Philips Pages: 15

Brand: Philips Pages: 22

Brand: Philips Pages: 21

Brand: Philips Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands