Hint
You can also operate the Wireless Party Chain function on “Sony | Music Center.”
What you can do with the Wireless Party Chain function depends on the systems you connect.
When using the Wireless Party Chain function, the codec automatically switches to SBC.
Note
When watching movies using the Wireless Party Chain function, there may be a gap between video and audio.
The Wireless Party Chain function is available only when the system is in BLUETOOTH function.
When you use the Wireless Party Chain function by connecting multiple types of audio systems, the illumination may not work
depending on the order of the systems you connected. In this case, set the system whose illumination does not work as the first
system.
Related Topic
Terminating the Wireless Party Chain function
4-748-029-41(1) Copyright 2019 Sony Corporation
Hint
Connect the second system within 1 minute. After 1 minute or more, the system setting is canceled.
To connect additional systems, repeat steps
– 1 to 2.
Hint
When connecting a third or more systems, connect each one within 30 seconds of connecting the previous system.
After 30 seconds or more, the system cannot be connected.
If you want to add another system after connecting (30 seconds or more), press and hold W.PARTY CHAIN/
LIGHT on the first system, then operate steps
– 1 to 2.
3.
Start playback.
Start playback on the connected BLUETOOTH device and adjust the volume.
The same music is played from all systems.
When adjusting the volume on the BLUETOOTH device or the system connected with the device (the system set
up as the first one), the volumes of all systems are automatically adjusted.
*
For other systems (the second or later
system set), you can also adjust the volume on each other.
3
Depending on the connected device, the volume may not be synchronized with the volume you adjusted on the first system.
*
39