![background image](http://html.mh-extra.com/html/sony/gtk-xb7/gtk-xb7_operating-instructions-manual_420565031.webp)
31
GB
Additional Inf
orma
tion
GTK-XB7.4-582-492-21(1)
Resetting the system
If the system still does not operate
properly, reset the system to factory
default settings.
1
Disconnect and reconnect the
AC power cord, and then turn
on the system.
2
Hold down FUNCTION and the
volume – on the unit for more
than 5 seconds.
After all the indicators on the unit
flash for more than 3 seconds, all
user-configured settings, such as
the pairing registration information,
are reset to factory default settings.
Precautions
On safety
•
Completely disconnect the AC power cord
(mains lead) from the wall outlet (mains) if
it is not going to be used for an extended
period of time. When unplugging the unit,
always grip the plug. Never pull the cord
itself.
•
Should any solid object or liquid get into
the system, unplug the system, and have
it checked by qualified personnel before
operating it again.
•
AC power cord must be changed only at
the qualified service shop.
On placement
•
Do not place the system in an inclined
position or in locations that are extremely
hot, cold, dusty, dirty, or humid or lacking
adequate ventilation, or subject to
vibration, direct sunlight or a bright light.
•
Be careful when placing the system on
surfaces that have been specially treated
(for example, wax, oil, polish) as staining
or discoloration of the surface may result.
On heat buildup
•
Heat buildup on the system during
operation is normal and is not a cause for
alarm.
•
Do not touch the cabinet if it has been
used continuously at a high volume
because the cabinet may have become
hot.
•
Do not obstruct the ventilation holes.
On the speaker system
The built-in speaker system is not
magnetically shielded, and the picture on
nearby TV sets may become magnetically
distorted. In this situation, turn off the TV,
wait 15 to 30 minutes, and turn it back on.
If there is no improvement, move the
system far away from the TV.
Cleaning the cabinet
Clean this system with a soft cloth slightly
moistened with a mild detergent solution.
Do not use any type of abrasive pad,
scouring powder, or solvent, such as thinner,
benzine, or alcohol.