29
GB
Using the Long Info menu
With this menu screen, you can set timers or record selected
programmes.
1
Push or to select a future programme in the programme list
column.
2
Press the
button to display the
Long Info
menu on the TV
screen.
To set the timer
Push the joystick
or
to highlight the
icon then press the
button repeatedly to "set the timer" or "cancel the timer". If you choose
to set the timer, the programme is marked with a clock symbol and a
message appears on the screen shortly before the programme is due
to start asking whether you wish to still view this programme.
To view the timer table
Push the joystick
or
to highlight the
icon then press the
button repeatedly to switch on/off the timer table. This table shows the
programmes on which you have already set a timer. (You can set a timer
on up to 5 programmes).
To record programmes
(only with Smartlink VCRs)
1
Connect your Smartlink VCR.
2
Push the joystick
or
to select
then press the
button
to download the information to your VCR.
3
To set up the VCR:
VPS/PDC
Push the joystick
or
to select
VPS
/
PDC
then press the
button repeatedly to select
On
or
Off
. With this setting on you have
the guaranteed recording of the whole broadcast should there be a
change in the TV programme. This only works if the selected
channel broadcasts a VPS/PDC signal.
Speed
Push the joystick to select
Speed
then press the
button
repeatedly to select between
SP
for standardplay or
LP
for longplay.
With longplay you can record twice as much on a videotape.
The picture quality however may suffer.
VCR Setup
Push the joystick to select
VCR Setup
then press the
button repeatedly to select which
VCR
you wish to programme,
namely
VCR1
or
VCR2
.
4
Finally, push the joystick
to select the
icon then press the
button to remove the menu from the TV screen.
NexTView
NexTView
07 Tue
12:38
Address Mapping
The position of the addresses in the
OSDA is shown in the following diagram.
The position values of the DPW are set
to '0'.
If other values are set, the complete
combination will be scrolled.
Example:
if the DPWC is set to '63', the char-
Speed
Timer Prog
VPS/PDC
SP
VCR1
On
This channel has been set for a timer
First nextTView/EPG-Providers in Europe
SWISS
TXT
TPS / RINGIER
nexTView
Tue 07. 04 .98
Speed
VCR Setup
VPS/PDC
SP
VCR1
On
01GBKF50/42SX200K.fm Page 29 Tuesday, January 7, 2003 12:37 PM