Shooting Grip With Wireless Remote Commander
GP-VPT2BT
Pairing the unit with the mounted camera
Establish a Bluetooth connection between this unit and a camera.
Before establishing a Bluetooth connection, you must pair the unit with the camera (device registration).
Note
The following is an example of the mounting procedure for Sony Interchangeable Lens Digital Cameras and Sony digital still
cameras.
Before you start pairing, make sure that the LOCK switch on this unit is NOT in the “LOCK” position.
Note
If pairing fails, the indicator on this unit flashes rapidly. If this happens, repeat the procedure all over again.
A pairing attempt times out when a certain amount of time elapses between the actions in step
and step
.
In the event of the following, pair this unit with the mounted camera all over again.
On the camera, select MENU →
(network) → [Bluetooth Settings] → [Bluetooth Function] → [On].
1
On the camera, select MENU →
(network) → [Bluetooth Rmt Ctrl] → [On].
If the pairing screen appears on the camera's screen, proceed to step
.
2
On the camera, select MENU →
(network) → [Bluetooth Settings] → [Pairing].
3
On this unit, press and hold the PHOTO button (
) and the T side of the Zoom button (
) simultaneously
for at least 7 seconds.
4
When a confirmation message appears on the camera's screen, select [OK].
appears and pairing begins.
When pairing is complete, [Paired.] appears.
5
8
