Sony FWD-50PX3 - 50" Plasma Panel, Service Manual

Page: 51 / 135

2-2
FWD-50PX3
2-1-3. Description of Main Items
1. White Balance
Red Gain: Sets Red Gain.
Green Gain: Sets Green Gain.
Blue Gain: Sets Blue Gain.
Red Offset: Sets Red Offset.
Green Offset: Sets Green Offset.
Blue Offset:
Sets Blue Offset.
2. AD Calibration
Source: For factory menu
Red Offset1: For factory menu
Green Offset1: For factory menu
Blue Offset1:
For factory menu
Red Offset2: For factory menu
Green Offset2: For factory menu
Blue Offset2:
For factory menu
Red Gain: For factory menu
Green Gain: For factory menu
Blue Gain: For factory menu
3. Picture Setting
Decoder Setting: For factory menu
4. AUDIO
Audio Delay: Sets delay timing of audio sound.
5. INITIALIZATION
All Reset Without NVRAM: For factory menu
All Reset With NVRAM:
For factory menu
EEPROM Initialization: For factory menu
EEPROM Init. Except WB: For factory menu
EEPROM Init. with 0x00: For factory menu
6. Setup
SERIAL MODE: Sets Serial Mode to communicate with
the set by using RS-232C.
SONY: This is for user to control the
set by using RS-232C as
remote controller.
LG: For factory menu
(Usually not used)
ETC: For developer
(Usually not used)
Baud rate: Sets communication speed
7. FOR SONY TEST
S-Init GOOD: Initializes whole data except Operation
Time for user to be able to use the set.
FAN FOR TEST: Sets fan on/off.
n
This mode is used for the check in
service. The fan is stopped under
normal condition. It operates when the
temperature inside of this unit rises.
Standby Mode: For factory menu
Option DPMS: For factory menu
7. FOR TEST
AGING ON/OFF: Sets Aging Mode on/off.
FAN ON/OFF: Sets fan on/off.
Init Good: For factory menu
9. Temperature
Off Time: Sets temperature to turn off the fan.
On Time: Sets temperature to turn on the fan.
Temperature1: Displays temperature of Sensor 1.
Temperature2: Displays temperature of Sensor 2.
Temperature3: Displays temperature of Sensor 3.
Cable connection
COM port
RS-232C cable
Personal computer