![background image](http://html.mh-extra.com/html/sony/fst-zx100d/fst-zx100d_operating-instructions-manual_420542088.webp)
88
GB
When using a tape longer than
90 minutes
The tape is very elastic. Do not change the tape
operations such as playback, stop and fast-winding etc.
frequently. The tape may get entangled in the tape
deck.
Cleaning the tape heads
Clean the tape heads after every 10 hours of use. Be
sure to clean the tape heads before you start an
important recording or after playing an old tape. Use a
separately sold dry-type or wet-type cleaning tape. For
details, refer to the instructions of the cleaning tape.
Demagnetizing the tape heads
Demagnetize the tape heads and the metal parts that
have contact with the tape after every 20 to 30 hours of
use with a separately sold demagnetizing tape. For
details, refer to the instructions of the demagnetizing
tape.
Amplifier section
FST-ZX100D/LBT-ZX100D
The following are measured at AC 120, 127, 220,
240V 50/60 Hz
DIN power output (rated): 130 W + 130 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
Front speaker:
170 W + 170 W
(6 ohms at 1 kHz, 10%
THD)
Center speaker:
80 W
(16 ohms at 1 kHz, 10%
THD)
Surround speaker:
170 W + 170 W
(6 ohms at 1 kHz, 10%
THD)
Subwoofer:
180 W (8 ohms at 100 Hz,
10% THD)
FST-ZX80D/LBT-ZX80D
The following are measured at AC 120, 127, 220,
240V 50/60 Hz
DIN power output (rated): 155 W + 155 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
Front speaker:
200 W + 200 W
(6 ohms at 1 kHz, 10%
THD)
Center speaker:
80 W
(16 ohms at 1 kHz, 10%
THD)
Surround speaker:
200 W + 200 W
(6 ohms at 1 kHz, 10%
THD)
MHC-GN1000D
The following are measured at AC 120, 127, 220,
240V 50/60 Hz
DIN power output (rated): 125 W + 125 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
Front speaker:
170 W + 170 W
(6 ohms at 1 kHz, 10%
THD)
Center speaker:
70 W
(6 ohms at 1 kHz, 10%
THD)
Surround speaker:
70 W + 70 W
(6 ohms at 1 kHz, 10%
THD)
Subwoofer:
210 W (8 ohms at 100 Hz,
10% THD)
Inputs
VIDEO INPUT (phono jacks):
VIDEO: 1 Vp-p, 75 ohms
AUDIO L/R: Voltage
250 mV, impedance 47
kilohms
TV/SAT AUDIO IN L/R (phono jacks):
Voltage 250 mV/450 mV,
impedance 47 kilohms
MIC 1 or 2 (phone jack):
Sensitivity 1 mV,
impedance 10 kilohms
Specifications