28
GB
— Program Play
You can make a program of up to 25 steps
in the order you want them to be played
back.
1
Press
(or USB on the
remote).
2
When playback is stopped,
press PLAY MODE on the
remote repeatedly until
“PROGRAM” lights up in the
display.
3
Press
+/– repeatedly until the
folder you want appears in the
display.
4
Press
.
or
>
repeatedly
until the track number you want
appears in the display.
5
Press ENTER.
The track is programmed.
The programmed step number appears
in the display.
6
To program additional tracks.
7
Press
NX
(or
N
on the
remote).
Program Play starts.
Other operations
Note
The program list is cleared when you perform
the erase operation.
Tip
The program you made remains in the system’s
memory even after it has been played back.
Press
NX
(or
N
on the remote) to play back
the same program again.
— Repeat Play
You can play back all the tracks or a
single track on an USB device repeatedly.
Press REPEAT on the remote
repeatedly during playback until
“REP” or “REP 1” lights up in the
display.
• REP: All the tracks are played back
repeatedly.
• REP 1: A single track is played back
repeatedly until “REP 1” is canceled.
To cancel Repeat Play
Press REPEAT on the remote repeatedly
until both “REP” and “REP 1” light off
from the display.
Creating your own program
To program
Repeat steps
Other tracks on
the same folder
4 and 5
Other tracks on
other folders
3 to 5
USB
Track name
To
Do this
Cancel Program
Play
When playback is
stopped, press PLAY
MODE on the remote
repeatedly until
“PROGRAM” light off
from the display.
Delete the last step
from the program
list
Press CLEAR on the
remote when playback is
stopped.
Playing repeatedly
