— 11 —
KV-32HS500/32HV600/34DRC500/34XBR800/36HS500/
36XBR800/38DRC500/40XBR800/42DRC800
1-1. REAR COVER REMOVAL
1-2. CHASSIS ASSEMBLY REMOVAL
1-3. SERVICE POSITION
SECTION 1: DISASSEMBLY
1
CAUTION!
- Heat sink on IC5004 is -15V. Care must be
taken not to allow heat sink to touch any other components.
2
Lift lever up on the right and left sides of the chassis bracket
and gently pull the chassis assembly away from the bezel.
Pull up and rotate both the A and D Boards in order to service
the unit.
When plugging in connector from HM Board to B Board at
CN3603 insure two brown wires are facing upward towards
neck assembly.
1
Lift lever up on the right and left sides of the chassis
bracket and gently pull the chassis assembly away from
the bezel.
Pull up and rotate both the A and D Boards in order to
service the unit.
2
3
4
Rear Cover
6 Screws
+BVTP 4 x 16
4 Screws
+BVTP 4 x 16
4 Screws
+BVTP 4 x 16