Sony FD Trinitron WEGA KV-32HS510, Service Manual

Page: 319 / 376

13
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
Jack Description
1 DVI-HDTV
VIDEO
AUDIO R/L
(VIDEO 7 IN) Can accommodate a copy-protected digital connection (HDCP*) to other devices
(such as digital set-top boxes) that have compatible interfaces. The DVI-HDTV
input terminal is compliant with the EIA-861 standard and is not intended for use
with personal computers. See the instruction manual that came with your
equipment for details about connecting and using it with the TV.
2 S VIDEO IN 1/3 Connects to the S VIDEO OUT jack of your VCR or other video equipment that has
S VIDEO. S VIDEO provides better picture quality than either composite video (
3 )
or VHF/UHF ( 9 ) connections.
3 VIDEO IN 1/3/4
VIDEO/L(MONO)
-AUDIO-R Connect to the composite A/V output jacks on your VCR or other video
component. A fourth component A/V input jack (VIDEO 2) is located on the front
panel of the TV. This video connection provides better picture quality than the
VHF/UHF (
9 ) connection.
4 MONITOR OUT Lets you record the program you are watching to a VCR. When two VCRs are
connected, you can use the TV as a monitor for tape-to-tape editing (not available
with 480p, 720p, or 1080i when the input is set to VIDEO 5 or 6).
5
AUDIO OUT (VAR/FIX)
L (MONO)/R
Connects to the left and right audio input jacks of your audio or video equipment.
You can use these outputs to listen to your TV’s audio through your stereo system.
6 HD/DVD IN 5/6
(1080i/720p/480p/480i) Connect to your DVD player’s or digital set-top box’s component video (Y, P
B
, P
R
)
and audio (L/R) jacks. Component video provides better picture quality than 2 ,
3 , or 9 ).
7 AUX Auxiliary RF input that connects to your antenna, CATV cable, or cable box output
jack. This is convenient if you are using two VHF/UHF sources (antenna, CATV
cable, or cable box). For details, see pages 16 to 19.
8
TO CONVERTER
Connects to your cable box input jack. This VHF/UHF output jack lets you set up
your TV to switch between scrambled channels (coming through a cable box) and
unscrambled cable channels. Use this jack instead of a splitter to get better picture
quality when you need to switch between scrambled and unscrambled cable
channels. For details, see pages 18 to 19.
9 VHF/UHF Primary RF input that connects to your VHF/UHF antenna or cable.
0 CONTROL S
IN/OUT Allows the TV to receive (IN) and send (OUT) remote control signals to other Sony
infrared-controlled audio or video equipment that has the CONTROL S function.
* High-bandwidth Digital Content Protection
34XBR.book Page 13 Friday, February 7, 2003 4:03 PM