10
30
The following chapter contains all the steps necessary when first installing your TV and
the basic TV functions.
Step 1 Installation
A Connecting the TV Set
1
Connect the TV set to the mains socket (220-240 V. AC, 50 Hz).
2a
Connect a conventional aerial cable to the socket marked
˘
M
on the rear of the TV set.
or
2b
Connect your Satellite Receiver to one of the Scart connectors
J
K
L
of the TV set.
When connecting a VCR to your TV set:
We recommend that you use the preset function Manual Programme Preset (page 33) to tune
in the VCR signal to programme position 0.
First Time Operation
First Time Operation
B Inserting the Batteries into the Remote Control
Make sure to insert the batteries using the correct polarities.
Dispose of exhausted batteries according to your local regulations.
C Switching on the TV Set
•
Press the switch
U
E
at the front of the TV set.
If the standby mode indicator
u
D
on the TV is lit, press TV I/
u
1
on the
Remote Control to switch on the TV set.
R/D/D/D
L/G/S/I
R/D/D/D
L/G/S/I
OUT IN
VIDEO
SAT
E
D
31
First Time Operation
Step 2 Basic Presetting
A The Menu System
Your TV uses an on-screen menu system to guide you through the operations.
Use the following buttons on the Remote Control to operate the menu system:
•
Press MENU
!™
to switch the menu on and off.
•
Use
“
,
”
,
4
,
$
of the joystick
!¡
to select within the menu system.
•
Press OK to store.
•
When menu is switched off:
Press
“
to return to the last menu screen.
C Automatic Tuning In of Channels
•
Push the joystick
!¡
to
”
.
After all available channels are stored, the TV goes back to the programme
position with which you started the automatic tuning. Your TV is now ready
for use.
ϖ
To stop the automatic tuning: Press OK
!¡
.
ϖ
If you wish to change the sequence of the stored channels, go to
Sorting Programme Positions in Advanced Presetting.
ϖ
If you need to change or repeat the tuning afterwards (e.g. when you move
house) : select the menu Auto Tuning in the Set Up
menu.
1
Press the MENU
!™
button.
The menu Language/Country appears on the screen.
2
Push the joystick
!¡
to
”
. Push the joystick
!¡
to
$
to select the language.
Press OK
!¡
.
The menus appear in the selected language.
3
Push the joystick
!¡
to
$
to select Country. Push the joystick
!¡
to
”
.
4
Select the country in which you will operate the TV set using
$
or
4
.
Confirm by pressing OK
!¡
.
The menu Auto Tuning appears.
B Selecting Language and Country
Language/Country
Language
Country
Select:
Enter:
English
Off
Language/Country
Language
Country
Select:
Enter:
Language/Country
Language
Country
Select Country:
Confirm: OK
English
Off
Austria
Belgium
Bulgaria
Czech Rep.
Denmark
Finland
English
Off
Set Up
Auto Tuning
Programme Sorting
AV Preset
Installation
Select:
Start Auto Tuning:
Start
1
2
3
4
5
CO2
CO3
CO4
CO7
CO8
Searching
