Sony FCB-CV7520A Technical Manual Download Page 3

Page: 3 / 77

Overview

FCB-EV7520A(GB) D-023-100-11(1)

Features

• Imager

This camera uses a 1/2.8" “Exmor R” CMOS

(complementary metal-oxide semiconductor) image

sensor (approx. 2.13 million effective pixels) that

supports FULL HD (high definition) to produce high-

quality images.

• ISP

Using the image signal processor (ISP), the following

images can be obtained.

- Full HD 60fps output image

- Low focal plane distortion image using the

high-speed readout of imager

The following functions are provided.

- Noise Reduction (NR), and Image Stabilizer

functions

- Wide Dynamic Range Mode (Wide-D), Tone

correction (Visibility Enhancer), and Defog

functions

• Lens

The camera is equipped with a bright lens with 30×

optical zoom and F1.6 aperture.

With consideration given environmental protection,

this module is designed to operate with low power

consumption and also incorporates lead-free and

halogen-free circuit boards.

Summary of Contents for FCB-CV7520A














































































Search results

Summary of Contents for FCB-CV7520A

Reviews:

Related manuals for FCB-CV7520A

Brands by name

Popular brands

Sony FCB-CV7520A, Technical Manual

Search results

Summary of Contents for FCB-CV7520A

Reviews:

Related manuals for FCB-CV7520A

Brands by name

Popular brands