25
Camera Settings / Basic Settings using the Subdisplay
Chapt
er
3
B
a
s
ic
A
d
jus
tment
s
and Se
tt
ing
s
3-2 Camera Settings
The camera can be configured from the following devices.
Subdisplay
You perform the basic setup configuration using the
subdisplay on the side of the camera head.
The basic settings (settings page) is displayed on the
subdisplay when power is applied to the camera. Press and
hold the SETTING button for 1 second or longer to switch
to Settings Change mode. The MENU SEL/ENTER dial,
SETTING button and BACK button are used for Settings
Change mode operation.
For details about settings on the subdisplay, see “3-3 Basic
Settings using the Subdisplay” (page 25). For details about
the subdisplay menu list, see “4-1 Subdisplay Menu List”
(page 40).
Viewfinder or monitor
Detailed settings can be performed by displaying the menu
(VF menu) in the viewfinder or on a monitor connected to
an SDI OUT connector.
Press the VF MENU button on the side of the camera to
display the VF menu in the viewfinder or on a monitor. The
VF MENU button, MENU SEL/ENTER dial, and BACK
button are used for VF menu operation.
For details about VF menu operations, see “3-4 VF Menu
Basic Operation” (page 33). For details about the VF
menu list, see “4-2 VF Menu List” (page 42).
Web browser
If the camera is connected to a network, the menus can be
displayed in a web browser on a computer. The settings
displayed are almost identical to the display in the
viewfinder or on a monitor.
For details about web browser operations, see “Menu
Operation using a Web Browser” (page 67).
Tablet device
If the camera is used with the optional Wi-Fi adapter
(CBK-WA01), the menus can be displayed on a tablet
device, such as an iPad, via a wireless LAN. The settings
displayed are almost identical to the display in the
viewfinder or on a monitor.
For details about tablet device operations, see “Operation
using a Tablet Device” (page 68).
3-3 Basic Settings using
the Subdisplay
Basic settings of the camera can be easily performed using
the subdisplay. The items set on the subdisplay can also be
set using the VF menu.
3-3-1 Basic Operation of the
Subdisplay
The buttons and dial shown below are used for operation of
the subdisplay.
Side panel of the camera head
To display the settings pages
After the camera is turned on, the startup screen is
displayed on the subdisplay for several seconds, after
which the settings page is displayed.
Pressing the PAGE button advances to the next page.
The following items can be set or checked on each settings
page.
Settings page 1
BACK button
Subdisplay
SETTING button
PAGE button
MENU SEL/ENTER dial
1
2
3
4
6
5
7