27
Shooting
Op
e
ra
tio
n
B
Operation
Shooting
1
Turn on the power of the camera and
all connected devices.
2
Illuminate an object with proper
lighting.
3
Aim the camera to the object and
adjust the iris, focus and zoom.
4
Adjust the white balance.
For details, see “Adjusting the White
Balance” on page 28.
5
Adjust the settings as required.
For details, see “Adjusting and Setting
with Menus” on page 13.
6
Start shooting.
Adjust the black balance first, after turning
on the power of your camera.
1
If any menu is displayed on the screen,
press the MENU button to remove it.
2
If a color bar signal is displayed on the
screen, press the BARS button to
remove it.
3
Press the BLACK button.
The lens iris control is automatically
closed, and the black balance is adjusted.
If you use a manual-iris lens, close the
iris then press the BLACK button.
While adjusting, the bars are displayed.
When the adjustment is completed, the
message “BLACK: OK” appears on the
screen.
Black balance adjustment errors
If the black balance adjustment is not
successful, the message “BLACK: NG”
appears on the screen. If this happens, take
the necessary measures and perform steps 1
through 3 again.
For details, see “List of Messages” on page
42.
Basic Shooting Procedure
2
3
4, 5
Adjusting the Black Balance
TRIG IN
MENU
BLACK
FILE
SELECT
WHITE
BARS
ENTER
RGB/SYNC
1
3 2
Summary of Contents for ExwaveHAD DXC-990P
Page 48: ...Sony Corporation ...
