Get
ting S
tar
te
d
17
GB
5: Switching on the
system
Install this system so that the power cord can be
unplugged from the wall socket immediately in the
event of trouble.
1
Connect the system to your mains socket
(220-240V AC, 50Hz).
2
Press
1
on the system (top of the lift
unit).
When you switch on the system for the first time,
the Language menu appears on the screen, then go
to “6: Selecting the TV language and country/
region” (page 17).
When the system is in standby mode (the
1
(standby) indicator on the system is red), press
+
/
1
on the remote to switch on the system.
Notes
• Depending on the Lift Mode setting or selected input,
the lift unit will move down when turning on the
system.
• To recall from standby mode by pressing
1
on the
system, press
1
to turn off the system, and then press
and hold
1
again until
`
(power indicator) lights up in
green.
To save the power in standby mode
Press
"
/
1
on the remote while the system turns on. To
cancel standby mode, press
"
/
1
once.
6: Selecting the TV
language and country/
region
When you switch on the system for the first time, the
Language menu appears on the screen.
1
Press
<
/
M
/
m
/
,
to select the language
displayed on the menu screens, then
press
(OK).
2
Press
M
/
m
to select the country/region in
which you will operate the system, then
press
(OK).
The message confirming the system start auto-
tuning appears on the screen.
1
AC power cord
(mains lead)
<
/
M
/
m
/
,
(OK)
Language
Select Language
Continued
