Sony ECM-W2BT Help Manual Download Page 1

Page: 1 / 25

Help Guide

Wireless Microphone

ECM-W2BT

Use this Help Guide when you have issues or questions on how to use your wireless microphone.

Compatible cameras

The Wireless Microphone ECM-W2BT (referred to below as “this unit”) is compatible with a camera

that has a Multi Interface Shoe such as a Sony Interchangeable Lens Digital Camera (referred to

below as “camera”).

- Even if your camera has a Multi Interface Shoe, you may be unable to use it with this unit or some

functions may not work.

- The receiver and the microphone are factory-set to communicate with each other. Therefore,

operations usually needed for Bluetooth devices such as pairing and passkey input are not

necessary. Communication is not possible with a receiver and microphone not sold as a pair,

multiple microphones, or any other Bluetooth device such as a smartphone, computer, etc.

For camera models compatible with this unit, view here. (Another window will open.)

Locating parts and controls

Preparations

Unpacking

Charging the receiver

Charging the microphone

Attaching the receiver to a camera

Attaching the microphone to clothing

Attaching the wind screen

Storing the receiver and the microphone all together

Recording

About the mode switch

Recording

Recording with an external microphone

Lamp indications

About this unit

Notes on use

Summary of Contents for ECM-W2BT























Search results

Summary of Contents for ECM-W2BT

Reviews:

Related manuals for ECM-W2BT

Brands by name

Popular brands

Sony ECM-W2BT, Help Manual

Search results

Summary of Contents for ECM-W2BT

Reviews:

Related manuals for ECM-W2BT

Brands by name

Popular brands