background image

6

bag, for example, and keep it away from metal objects 
during transport or storage.

• The battery will slowly discharge, even when the unit is 

turned off. Remove the battery from the unit before 
extended periods of disuse.

Charging the Battery

• Be sure to charge the battery before using the unit for the 

first time.

• A charged battery will slowly discharge, even when it is 

not in use. Be sure to charge the battery before each use 
to ensure safe operation.

Use the BC-DWX1 battery charger to charge the battery 
while it is inserted in the unit.
Insert the unit fully into the charging port on the BC-
DWX1.

For details on charging, refer to the BC-DWX1 battery 
charger’s operating instructions.

Charging time

Fully charging a fully discharged NP-BX1 rechargeable 
battery pack (supplied) inserted in the unit in an ambient 
temperature of 25 °C (77 °F) will take about 3 hours.
The charging time may be longer depending on your 
operating environment. In addition, battery packs that have 
not been used for extended periods may take longer to 
charge.

When you are in a hurry

If necessary, devices can be removed from the unit before 
they are fully charged. However, their usable durations 
will vary depending on how long they were charged.

• If you insert the unit into the BC-DWX1 while the unit 

is turned on, the unit will turn off, but charging will still 
occur. The unit will remain turned off, even after you 
remove it from the BC-DWX1.

• Proper charging may not be possible if the battery 

terminals or the unit’s charging terminals are dirty. In 
such cases, wipe the terminals with a dry cloth or cotton 
swab. When doing so, make sure that the unit is turned 

off, and never touch the terminals directly with your 
hands.

• Always use genuine Sony lithium-ion batteries.

Remaining battery indicator

Indicates the remaining battery charge.
Replace the battery with a charged battery when the 
remaining battery indicator starts to blink.

• If you intend to use the unit continuously for an extended 

period, we recommend replacing the battery with a fully 
charged battery.

• The indicator may not be correct depending on your 

operating environment.

• The unit is designed to operate for at least 30 minutes 

after the remaining battery indicator starts to blink, but it 
may operate for longer in optimal environments.

Notes

Notes

Notes

Summary of Contents for DWT-B03R


























Reviews: