Sony DWT-B01N Operating Instructions Manual Download Page 15 | Manualshive

Page: 15 / 21

background image

15

Attaching the Antenna
Tubes

Noise may occur if the antenna attachment areas come into
contact with metallic objects.
Attaching the antenna tubes will prevent accidental contact
of the antenna attachment areas with metallic objects.

Do not pull on the antennas when attaching or removing
the antenna tubes. In addition, do not attach or remove the
antenna tubes while holding the antennas. Doing so may
damage the antennas.

Attaching the antenna tubes

Hold the unit by its body with the antennas attached.
Gently grasp the antenna tube, and slowly slide it onto the
antenna all the way to the base of the antenna attachment
area.

Removing the antenna tubes

Hold the unit by its body with the antennas attached.
Gently grasp the antenna tube, and slowly slide it off the
antenna from the base of the antenna attachment area.

Hook and loop
fastener

Fig. 2

Belt

Note

«
...
13
14
15
16
17
...
»

Summary of Contents for DWT-B01N






















Reviews:

No comments

Related manuals for DWT-B01N

AquaTrans AT868

Brand: GE Pages: 67

Brand: W.E. Anderson Pages: 4

Brand: Fairchild Pages: 8

Brand: teko Pages: 2

Tourguide Wireless Transmitter SR 2020 D

Brand: Sennheiser Pages: 32

Brand: Radio Shack Pages: 24

Brand: GEPRC Pages: 3

Brand: Procare Pages: 2

Brand: RKI Instruments Pages: 67

Brand: Icom Pages: 32

Rosemount 2051G

Brand: Emerson Pages: 90

Brand: Emerson Pages: 92

Rosemount 2240S

Brand: Emerson Pages: 194

Rosemount 2051HT

Brand: Emerson Pages: 32

Brand: Richelieu Pages: 2

Brand: Gewa Pages: 8

Brand: Heathkit Pages: 112

Brand: Audio Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands