background image

35

UTILITY Menu

Low receiving signal quality 

(QL LOW)

Specifies whether to display a warning via the ALERT 
indicator when the quality of the received signal is low.

ON/OFF

Excess peak level for audio input 

(AF PEAK)

Specifies whether to display a warning via the ALERT 
indicator when the audio input has been detected as 
exceeding the peak level.

ON/OFF

Low transmitter battery 

(TX BATTERY LOW)

Specifies whether to display a warning via the ALERT 
indicator when the remaining battery of the transmitter is 
detected as low.

ON/OFF

Encryption mismatch 

(ENCRYPTION 

UNMATCH)

Specifies whether to display a warning via the ALERT 
indicator when a mismatch between the encrypted 
communication settings for the transmitter and the receiver 
is detected.

ON/OFF

Unsynchronized with external sync signal 

(EXTERNAL WORD SYNC UNLOCK)

Specifies whether to display a warning via the ALERT 
indicator when synchronization with the external sync 
signal (word clock) is not possible.

ON/OFF

Items Related to Display (DISPLAY 
submenu)

Setting the brightness of the display

 

(BRIGHTNESS)

Ten levels of brightness can be selected for the organic 
light-emitting diode display.
The selectable settings are the following:
(Dark) 

1  2  3  4  5  6  7  8  9 10

 (Bright)

Automatic dimming of the display 

(DIMMER 

MODE)

The organic light-emitting diode display can be set to dim 
or turn off after a certain amount of time.

AUTO OFF:

 The display turns off after 30 seconds. The 

display goes on again when you use any button/control.

AUTO DIMMER:

 The display dims after 30 seconds. The 

display becomes bright again when you use any button/
control.

ALWAYS ON:

 The display stays on at the brightness 

level set with the BRIGHTNESS function.

Resetting Parameters to Their 
Factory Settings 

(FACTORY PRESET)

All parameter settings can be returned to their factory 
settings.
A message appears asking for confirmation. Rotate the jog 
dial to select YES.
The receiver parameters are reset to their factory settings.

Displaying the Software Version 

(VERSION)

The version of receiver software can be displayed.

Summary of Contents for DWR-R01D














































Reviews: