Sony DVS-9000, User Manual

Page: 407 / 1228

407
Copy and Swap Operations
Chapt
er
8
Co
lor Ba
c
k
g
ro
und
s
, Cop
y
a
nd Sw
ap
, an
d Ot
her
S
e
tt
ing
s
3
Using any of the following methods, select the data to be copied or
swapped.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs to make the setting.
a) Transition control block wipe data
b) Independent key transition control block wipe data
For details of the data affected, see “Copy and Swap” (page 402).
4
To copy, press [Copy], and to swap, press [Swap].
This carries out the copy or swap.
To undo a copy or swap
Press [Undo], to return to the state before the copy or swap was carried out.
Copy by Button Operation
You can carry out the following copy operations by a simple button operation.
• M/E copy
• Keyer copy
• Wipe copy
• DME wipe copy
Note
On the CCP-6224/6324, it is not possible to carry out a copy by button
operation.
Basic button operation
The basic button operation is to hold down the copy source button, then press
the destination button.
You can undo the last operation using [Undo] in the menu
(see page 407).
Knob Parameter Adjustment Setting values
1 Left No Select data for copy/swap
source
1 to 4
a)
1 to 16
b)
2 Right No Select data for copy/swap
destination
1 to 4
a)
1 to 16
b)