7-1
7-1. POWER SUPPLY ADJUSTMENT
1. Power Supply Check
(HS-030SF/030SH BOARD, SRV902UC BOARD)
Mode
E-E
Instrument
Digital voltmeter
+5 V Check
Test point
CN202 pin
5
Specification
5.0 ± 0.2 Vdc
+3.3 V Check
Test point
CN202 pin
7
Specification
3.3 ± 0.2 Vdc
EVER+5 V Check
Test point
CN203 pin
2
Specification
5.0 ± 0.2 Vdc
P_CONT Check
Test point
CN203 pin
1
Specification
4V – 5 Vdc
A +12 V Check
Test point
CN202 pin
1
Specification
9.5 Vdc
–12 V Check
Test point
CN203 pin
5
Specification
–12.0 ± 1.0 Vdc
M +12 V Check
Test point
CN202 pin
2
Specification
12.0 ± 1.0 Vdc
Checking method:
1) Confirm that each voltage satisfies the specification.
2. +3.3 V Adjustment (SRV902UC BOARD)
(DVP-S330/S530D: US, Canadian/S550D)
Mode
PB
Measuring Instrument
Digital voltmeter
Measurement Point
CN202 pin
7
Adjusting Element
VR201
Specified Value
3.3 ± 0.2 V
SECTION 7
ELECTRICAL ADJUSTMENTS
DVP-S330/S530D/S550D/S705D
In making adjustment, refer to 7-3. Adjustment
Related Parts Arrangement.
Note
: During diagnostic check, the characters and color bars can
be seen only with the NTSC monitor. Therefore, for diag-
nostic check, use the monitor that supports both NTSC and
PAL modes
This section describes procedures and instructions necessary for
adjusting electrical circuits in this set.
Instruments required:
1) Color monitor TV
2) Oscilloscope 1 or 2 phenomena, band width over 100 MHz,
with delay mode
3) Frequency counter (over 8 digits)
4) Digital voltmeter
5) Standard commander
(RMT-D108A/D109A/D111A/D111E)
6) DVD reference disc
HLX-501 (J-6090-071-A) (dual layer)
HLX-503 (J-6090-069-A) (single layer)
HLX-504 (J-6090-088-A) (single layer)
HLX-505 (J-6090-089-A) (dual layer)
7) SACD reference disc
HLXA-509 (J-6090-090-A)
+1.5
–0.5
Summary of Contents for DVP S530D
