1-4
18
Notes
• Do not connect a VCR, etc., between your TV and the player. If you pass the player signals via the VCR,
you may not receive a clear image on the TV screen. If your TV has only one audio/video input jack,
connect the player to this jack.
• Consumers should note that not all high definition television sets are fully compatible with this product and
may cause artifacts to be displayed in the picture. In case of 525 or 625 progressive scan picture problems,
it is recommended that the user switch the connection to the ‘standard definition’ output. If there are
questions regarding your TV set compatibility with this 525p and 625p DVD player model, please contact
our customer service centre.
• When you connect the player to your TV via the SCART (EURO AV) jacks, the TV’s input source is set
to the player automatically when you start playback. In this case, press
t
(TV/video) on the remote to
return the input to the TV.
• If you set “LINE” in SCREEN SETUP to “RGB” (page 25, 67), the player outputs no component video
signals.
Using the NORMAL/PROGRESSIVE switch
By using the NORMAL/PROGRESSIVE switch, you can select the signal format in which the
player outputs video signals: interlace or progressive. The switch takes priority over the setting
made in “COMPONENT OUT.”
Connect the player using the COMPONENT VIDEO OUT jacks (pattern
A
above), and set the
NORMAL/PROGRESSIVE switch to NORMAL (interlace) or PROGRESSIVE. The
PROGRESSIVE indicator lights up when the player outputs progressive signals.
◆
PROGRESSIVE
Set to this position when:
– your TV accepts progressive signals, and,
– the TV is connected to the COMPONENT VIDEO OUT jacks.
Note that the pictures will not be clear or no picture will appear if you set the NORMAL/
PROGRESSIVE to PROGRESSIVE when either of the above conditions is not met.
◆
NORMAL (interlace)
Set to this position when:
– your TV does not accept progressive signals, or,
– your TV is connected to jacks other than the COMPONENT VIDEO OUT jacks (LINE OUT
(VIDEO) or S VIDEO OUT).
Note
When the NORMAL/PROGRESSIVE switch is set to PROGRESSIVE, you cannot select “LINE” and
“COMPONENT OUT” in “SCREEN SETUP.”
VCR
CD/DVD player
TV
Connect
directly
19
H
ook
up
s
Step 4: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
through
.
z
Hint
If you connect an AV amplifier (receiver) that
conforms to the 96 kHz sampling frequency, use
connection .
* Manufactured under license from Dolby
Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
** “DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
Components to be connected
Connection
Your setup (example)
TV
• Surround effects:
– TVS DYNAMIC (page 46)
– TVS WIDE (page 46)
(page 20)
Stereo amplifier (receiver) and two speakers
• Surround effects:
– TVS STANDARD (page 46)
or
MD deck/DAT deck
• Surround effects:
– TVS STANDARD (page 46)
(page 21)
AV amplifier (receiver) having a Dolby
*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects:
– Dolby Surround (Pro Logic) (page 75)
(page 22)
AV amplifier (receiver) with digital input jacks
having a Dolby Digital, DTS
**
, or MPEG audio
decoder and 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 75)
– DTS (page 75)
– MPEG (5.1ch) (page 75)
(page 23)
A
D
A
B
C
D
D
,
continued
20
Connecting to your TV
This connection will use your TV’s speakers for sound. If you use the SCART (EURO AV) cord
in pattern
B
of “Step 3: Connecting the Video Cords” (page 16), you do not have to connect
audio cords to your TV.
* The yellow plug is used for video signals (page
A
PROGRESSIVE
NORMAL
OPTICAL
PCM/
DTS/
MPEG/
DOLBY
DIGITAL
COAXIAL
DIGITAL OUT
COMPONENT
VIDEO
OUT
TV
(RGB)
LINE
LINE OUT
VIDEO
S VIDEO OUT
C
R
P
B
/
Y
P
R
/
C
B
LINE OUT
AUDIO L
R
A
TV
CD/DVD player
(white)
(red)
Audio/video
cord (supplied
with UK models)
(yellow)
*
21
H
ook
up
s
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
. If the amplifier
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
.
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
B
B-1
B-2
PROGRESSIVE
NORMAL
COMPONENT
VIDEO
OUT
TV
(RGB)
LINE
LINE OUT
VIDEO
S VIDEO OUT
C
R
P
B
/
Y
P
R
/
C
B
LINE OUT
AUDIO L
R
OPTICAL
PCM/
DTS/
MPEG/
DOLBY
DIGITAL
COAXIAL
DIGITAL OUT
B-1
B-2
OPTICAL
PCM/
DTS/
MPEG/
DOLBY
DIGITAL
COAXIAL
DIGITAL OUT
LINE OUT
AUDIO L
R
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front (L)
Front (R)
[Speakers]
(white)
(red)
(red)
(white)
Optical digital cord
(not supplied)
Remove jack cap
before connecting Stereo audio cord
(not supplied)
to audio input
to coaxial or optical digital input
Coaxial digital cord
(not supplied)
or
l
: Signal flow
to LINE OUT L/R (AUDIO)
to DIGITAL OUT
(COAXIAL or OPTICAL)
,
continued
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
