1-4
18
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen. If you want to change the aspect
ratio, please refer to page 64.
Notes
Do not connect a VCR, etc. between your TV and the player. If you pass the player signals via the VCR,
you may not receive a clear image on the TV screen. If your TV has only one audio/video input jack,
connect the player to this jack.
When you connect the player to your TV via the SCART (EURO AV) jacks, the TV s input source is set
to the player automatically when you start playback. In this case, press
t
(TV/video) on the remote to
return the input to the TV.
When you play a disc recorded in the NTSC colour system, the player outputs the video
signal or the Setup Display etc. in the NTSC colour system and the picture may not appear
on the PA L colour system televisions. In this case, open the tray and remove the disc.
VCR
CD/DVD player
TV
Connect
directly
19
Hookups
Step 4: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
through
.
* Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, and the
double-D symbol are trademarks of Dolby
Laboratories.
**
and
are trademarks
of Digital Theater Systems, Inc.
Components to be connected
Connection
Your setup (example)
TV
Surround effects: TVS DYNAMIC (page 50),
TVS WIDE (page 50)
(page 20)
Stereo amplifier (receiver) and two speakers
Surround effects: TVS STANDAR D (page 50)
or
MD deck/DAT deck
Surround effects: None
(page 21)
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
Surround effects: Dolby Surround (Pro Logic)
(page 71)
(page 22)
AV amplifier (receiver) with digital input jacks
having a Dolby Digital, DTS**, or MPEG audio
decoder and 6 speakers
Surround effects:
Dolby Digital (5.1ch) (page 71)
DTS (5.1ch) (page 71)
MPEG audio (5.1 ch) (page 71)
(page 23)
A
D
A
B
C
,
continued
D
DTS
DTS Digital Out
20
Connecting toyour TV
This connection will use your TV speakers for sound. If you use the SCART (EURO AV) cord
in pattern
B
of
3: Connecting the Video Cords (page 16), you do not have to connect
audio cords to your TV.
* The yellow plug is used for video signals
(page 16).
z
Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) jacks to the TV s audio
input jack.
A
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL
OPTICAL
DIGITAL OUT
LINE OUT
R-AUDIO-L
VIDEO
S VIDEO
OUT
CR
Y
COMPONENT VIDEO OUT
CB
LINE (RGB) -TV
A
LINE OUT
R-AUDIO-L
VIDEO
TV
l
: Signal flow
CD/DVD player
(white)
(red)
Audio/video
cord (supplied)
to audio input
(yellow)
*
(white)
(red)
(yellow)
*
to LINE OUT
L/R (AUDIO)
Step
21
Hookups
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
. If the amplifier
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
.
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
B
B-1
B-2
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL
DIGITAL OUT
OPTICAL
LINE OUT
R-AUDIO-L
VIDEO
S VIDEO
OUT
CR
Y
COMPONENT VIDEO OUT
CB
LINE (RGB) -TV
B-2
PCM/DTS/MPEG/
DOLBYDIGITAL
COAXIAL
DIGITAL OUT
OPTICAL
LINE OUT
R-AUDIO-L
VIDEO
B-1
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front (L)
Front (R)
[Speakers]
(white)
(red)
(red)
(white)
Coaxial digital
cord (not supplied)
Stereo audio cord
(not supplied)
to audio input
to coaxial or optical digital
input
Optical digital cord
(not supplied)
Remove jack cap
before connecting
or
l
: Signal flow
to LINE OUT L/R (AUDIO)
to DIGITAL OUT
(COAXIAL or OPTICA
L)
,
continued