16
B
If you are connecting to a monitor, projector, or AV amplifier
(receiver) having component video input jacks (Y, P
B
/C
B
, P
R
/C
R
)
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate colour reproduction and high quality images.
If your TV accepts progressive 525p/625p format signals, use this connection and set
“PROGRESSIVE (COMPONENT OUT)” in “SCREEN SETUP” to “ON” (page 63) to output
progressive signals.
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen. To change the aspect ratio, see
page 62.
To change the colour system
If the on-screen menu of the player does not appear on the connected TV, switch the player’s
colour system to match the colour system of the TV (NTSC or PAL).
First turn off the player by pressing
"
/
1
, and then press
"
/
1
again while holding down
x
on the
player. The player turns back on, and the name of the colour system scrolls across the front panel
display.
Note
Do not connect a VCR, etc., between your TV and the player. If you pass the player signals via the VCR, you
may not receive a clear image on the TV screen. If your TV has only one audio/video input jack, connect the
player to this jack.
Green
Blue
Red
Green
Blue
Red
VCR
CD/DVD player
TV
Connect
directly
