Sony DVP-CX870D - Cd/dvd Player Operating Instructions Manual Download Page 19

Page: 19 / 96

Playing Discs

Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the instructions supplied with your disc.

Turn on your TV.

Turn on the TV and select the video input so that you
can view the pictures from this player.

When using a receiver (amplifier)

Turn on the receiver (amplifier) and select the
appropriate position so that you can listen to the
sound from this player.

Press

to place the player in standby mode.

The player enters standby mode and the power
indicator lights up in red.

Press

on the remote to turn on the player.

The power indicator lights up in green.

Press

The player starts playback. Adjust the volume on the
TV or the receiver (amplifier).

To change the disc

Press DISC CHANGE to turn the indicator on. Then turn
the

–/

+ dial until the desired disc number

appears on the front panel display.
Press the

–/

+ dial to start playback.

Playing Discs

This chapter describes how to play a
DVD/CD/VIDEO CD.

Power indicator

DISC CHANGE

ALL

DVD

EDIT

FLIP

MEGA

SORT

FILE

–/

+ dial

Summary of Contents for DVP-CX870D - Cd/dvd Player

































































































Search results

Summary of Contents for DVP-CX870D - Cd/dvd Player

Reviews:

Brands by name

Popular brands

Sony DVP-CX870D - Cd/dvd Player, Operating Instructions Manual

Search results

Summary of Contents for DVP-CX870D - Cd/dvd Player

Reviews:

Brands by name

Popular brands