manualshive.com logo in svg

Sony DVD115E, Service Manual, Page: 176 / 195

Share
Download
Sony DVD115E Service Manual Download Page 176

6-44

DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ

2-1-5.

Unique disc ID (For all kind, DVD-RW, DVD-R, DVD+RDL)

Unique disc ID will be written on the disc which is used first time for AUDIT for 2008.
At the same time, same disc ID will be stored in the install folder of AUDIT for 2008.
AUDIT is checking whether these ID is same or not. Thus, the PC and the adj disc must be managed together.
In fact, adjustment discs can not be swapped between the PC which AUDIT for 2008 is installed each other.

The disk which ID is not storeed is considered as new disc (not recorded at all).
When you use the disc used halfway, it might be possible cause of some error.

1.

Disc shareing between the previous AUDIT and AUDIT for 2008

It is able to use on previous AUDIT but it is unable to use on AUDIT for

2008 again. Due to address mismatch of file management.

Unable to share

(AUDIT 2008 detect the disc as new one due to missing disc ID.)

DVD-R

Able to share

Start using disc first time is previous AUDIT

Able to share

DVD-RW

Start using disc first time is AUDIT for 2008

DVD+RDL

It is able to use on previous AUDIT but it is unable to use on AUDIT for

2008 again. Due to address mismatch of file management.

Unable to share

AUDIT 2008 detect the disc as new one due to missing disc ID.

All discs

Unable to share

(Each PC has deferent disc information)

AUDIT for 2008

previous AUDIT

AUDIT for 2008

previous AUDIT

AUDIT for 2008

previous AUDIT

AUDIT for 2008

previous AUDIT

AUDIT for 2008

previous AUDIT

AUDIT for 2008

previous AUDIT

AUDIT for 2008

previous AUDIT

AUDIT for 2008

previous AUDIT

AUDIT for 2008

previous AUDIT

OK

OK

OK

OK

OK

AUDIT for 2008

AUDIT for 2008

PC1

PC2

OK

2.

Disc shareing between the PC which is installed AUDIT for 2008

Summary of Contents for DVD115E




































































































































































































Reviews:

No comments