30
Recording a picture
(
3
)
Attach the wind screen to the microphone.
(
4
)
Loosen the microphone holder screw and open the cover.
(
5
)
Place the microphone into the holder with the model name (ECM-NV1) facing
upward, close the cover, and tighten the screw.
(
6
)
Connect the plug of the microphone to the INPUT1 connector.
(
7
)
Set the INPUT LEVEL selector to MIC or MIC ATT.
When the selector is set to MIC ATT, you can reduce the volume by about 20
dB. And set the +48V switch to ON.
(
8
)
Select the channel to be used, using the REC CH SELECT switch. Used
channels according to the position of the REC CH SELECT switch are as
follows:
The position of the REC CH
Audio input through The audio is recorded on
SELECT switch
CH1•CH2
INPUT1
Channel 1/2
INPUT2
—
CH1
INPUT1
Channel 1
INPUT2
Channel 2
CH1•CH2
REC CH
SELECT
INPUT
LEVEL
+48V
INPUT
LEVEL
+48V
CH1
LINE
MIC
ON
OFF
LINE
MIC
ATT
MIC
ATT
MIC
ON
OFF
INPUT1
INPUT2
REC CH
SELECT
INPUT
LEVEL
+48V
INPUT2
5
3
4
6
8
7
Summary of Contents for DVCAM DSR-PDX10
Page 263: ......