42
Menu Contents
C
h
ap
te
r 4
M
e
nu
S
e
tti
n
gs
FROM STILL [> From STILL]:
Set the time to switch from
still search mode to tape
protection mode. Also select
the type of tape protection
mode.
STILL TIMER [>> STL
timer]:
Set the time to
switch from still search
mode to tape
protection mode.
5 MIN [>>> 5 min] to 0.5 SEC [>>> 0.5 sec]:
Select time from
12 settings ranging from 0.5 second to 5 minutes in steps
of 0.1 second.
Factory default setting:
1MIN [>>> 1min]
Note
If the value is set to 1 minute or more, the unit enters internal
protection mode in 1 minute, which makes start up slower.
NEXT MODE [>> Next
mode]:
Select the type
of tape protection
mode to follow still
search mode when the
time set with the STILL
TIMER menu item
elapses.
*
STEP FWD [>>> Step]:
The tape is advanced at
1
/
30
times
normal speed for about 2 seconds.
STANDBY OFF [>>> STANDBY]:
Standby off mode
Note
The STEP setting is enabled only when “STILL TIMER” is set
to less than 1 minute.
VIDEO CONTROL [Video]: Settings related to video control Description of settings
STILL MODE [> STILL mod]:
Select the image to output in
still image mode.
*
AUTO [>> Auto]:
Output field 1 or field 2 as the still image,
according to the position the tape is stopped.
FRAME [>> Frame]:
Output a full frame as the still image.
FIELD1 [>> Field 1]:
Output only field 1 as the still image.
FIELD2 [>> Field 2]:
Output only field 2 as the still image.
(For DSR-1600A only)
SETUP ADD [> Setup add]:
Determine whether or not to add
black setup to analog video output signals.
*
OFF [>> OFF]:
Do not add black setup.
ON (ADD) [>> ON]:
Add black setup.
(For DSR-1600A only)
CC(F1) BLANK [>CC1 blank]:
Select whether to mute the
closed caption signal to be superimposed on the 1st field
of the output video signal.
*
OFF [>> OFF]:
Do not mute.
ON [>> ON]:
Mute.
(For DSR-1600A only)
CC(F2) BLANK [>CC2 blank]:
Select whether to mute the
closed caption signal to be superimposed on the 2nd field
of the output video signal.
*
OFF [>> OFF]:
Do not mute.
ON [>> ON]:
Mute.
WIDE MODE [>Wide mode]:
Determine whether to retain
wide-screen aspect ratio information accompanying video
being played back.
*
AUTO [>> Auto]:
When video being played back is
accompanied by wide-screen aspect ratio information,
retain the information.
OFF [>> OFF]:
Ignore wide-screen aspect ratio information.
ON [>> ON]:
Whenever recording or playing back video, retain
wide-screen aspect ratio information.
ESR MODE [>ESR mode]:
Select whether to enable the edge
subcarrier reducer (ESR).
*
OFF [>> OFF]:
Do not enable.
ON [>> ON]:
Enable.
When playing back a composite signal, set this to ON.
TAPE PROTECTION [Tape protct]: Settings related to tape
and video head protection
Description of settings
