20
3
Start playback of the portable audio device at a
moderate volume.
4
Set your usual listening volume on the unit.
5
Adjust the input level (page 18).
Card remote commander RM-X114
The corresponding buttons on the card remote
commander control the same functions as those
on this unit.
•
DSPL (display) button
To change display items.
•
MODE button
Press to select the radio band (FM/MW/LW).
•
SOURCE button
To turn on; change the source (Radio/USB/
AUX).
•
<
/
,
(SEEK –/+) buttons
To control Radio/USB, the same as –
.
/
+
>
on the unit.
•
SOUND button
The same as the select button on the unit.
•
OFF button
To turn off; stop the source.
•
VOL (volume) +/– button
To adjust volume.
•
LIST button
To select PTY in RDS.
•
M
(+)/
m
(–) buttons
To receive the stored stations (Radio); skip
albums (USB).
•
ATT (attenuate) button
To attenuate the sound. To cancel, press again.
*
Not available for this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE/OFF)
on the unit is pressed to
activate the unit first.
Additional Information
Precautions
• Cool off the unit beforehand if your car has been
parked in direct sunlight.
• Power antenna (aerial) extends automatically.
Playback order of MP3/WMA/AAC
files
About Device Inside Alert
If you turn the ignition switch to the OFF
position without removing the USB device or
iPod, “DEVICE INSIDE” will appear in the
display.
Open the front panel to remove the USB device
or iPod.
If the front panel is detached when the
ignition is turned off.
The Device Inside Alert LED flashes.
Tip
For how to remove the USB device or iPod, see
page 14 (USB), 17 (iPod).
Note
The Device Inside Alert will only sound if the built-in
amplifier is used.
DISC –
ATT
OFF
DSPL
MODE
SOURCE
DISC +
VOL
+
–
SEEK+
SEEK–
PRESET –
SOUND
ENTE
R
MENU
LIST
MODE
LIST
ENTER
*
ATT
DSPL
MENU
*
SOURCE
<
/
,
(SEEK –/+ )
SOUND
OFF
VOL (+/ –)
M
/
m
(DISC
*
/
PRESET
+/ –)
Folder
(album)
MP3/WMA/
AAC file
(track)
MP3/WMA/AAC