16
GB
Notes
• When mounting on the dashboard, remove the
visor clip carefully from the microphone
, then
attach the flat-mount base
to the microphone
.
• Before attaching the double-sided tape
clean
the surface of the dashboard with a dry cloth.
1
To enable the wired remote control,
set [STRG CONTROL] in [STEERING] to
[PRESET].
Installation
Before installing the unit, remove the trim
ring
and the mounting sleeve
from the
unit.
1
Pinch both edges of the trim ring
,
then pull it out.
2
Insert both release keys
until they
click, and pull down the mounting
sleeve
, then pull up the unit to
separate.
Before installing, make sure the catches on
both sides of the mounting sleeve
are
bent inwards 2 mm (
3
/
32
in).
1
Position the mounting sleeve
inside the dashboard, then bend the
claws outward for a tight fit.
2
Mount the unit onto the mounting
sleeve
, then attach the trim ring
.
Notes
• If the catches are straight or bent outwards, the
unit will not be installed securely and may spring
out.
• Make sure the 4 catches on the trim ring
are
properly engaged in the slots of the unit.
Using the wired remote control
Removing the trim ring and the
mounting sleeve
Face the hook inwards.
Mounting the unit in the
dashboard
CAUTION
Do not touch the left side of the unit when
removing from the dashboard. The
heatsink on the left side of the unit
remains hot right after use.
182 mm (7
1
/
4
in)
53 mm (2
1
/
8
in)
Catch
