Sony DSX-A110U, Operating Instructions Manual

Page: 9 / 52

9
GB
The CT data from the RDS transmission sets the
clock.
1
Set [SET CT] in [GENERAL] to [SET CT-ON]
(page 12).
Playing a USB Device
AOA (Android Open Accessory) 2.0, MSC (Mass
Storage Class) and MTP (Media Transfer Protocol)
type USB devices* compliant with the USB standard
can be used. Depending on the USB device, the
Android mode or MSC/MTP mode can be selected
on the unit.
Some digital media players or Android
smartphones may require setting to MTP mode.
* e.g., a USB flash drive, digital media player,
Android smartphone
Notes

For details on the compatibility of your USB device,
visit the support site on the back cover.

Smartphones with Android OS 4.1 or higher installed
support Android Open Accessory 2.0 (AOA 2.0).
However, some smartphones may not fully support
AOA 2.0 even if Android OS 4.1 or higher is installed.
For details on the compatibility of your Android
smartphone, visit the support site on the back cover.

Playback of the following files is not supported.
MP3/WMA/FLAC:

copyright-protected files

DRM (Digital Rights Management) files

Multi-channel audio files
MP3/WMA:

lossless compression files
Before making a connection, select the USB mode
(Android mode or MSC/MTP mode) depending on
the USB device (page 12).
1
Connect a USB device to the USB port
(page 6).
Playback starts.
If a device is already connected, to start
playback, press SRC to select [USB].
2
Adjust the volume on this unit.
To stop playback
Press and hold OFF for 1 second.
To remove the device
Stop playback, then remove the device.
Setting clock time (CT)
Playback