Chapter 1 Overview
14
Chapter 1 Overview
DC OUT
12V
DC IN
LINE
MIC
+48V ON
CH-1
AUDIO IN
CH-2
TALLY
LINE
MIC
+48V ON
Input/Output Connectors
Location and Function of Parts
1
TC OUT (time code output) connector (BNC)
This outputs time code signals from the built-in time
code generator. When a time code signal is input to the
TC IN connector
2
, this output signal is synchronized
to it.
For details about time code, see “Setting Time Code Value”
on page 51.
2
TC IN (time code input) connector (BNC)
Input an external signal for synchronizing the built-in
time code generator. Use an SMPTE (DSR-1) or EBU
(DSR-1P) time code signal.
Note
Use a jitterless LTC signal. Using an LTC signal
reproduced by other equipment may cause the DSR-1/
1P to malfunction.
3
GEN LOCK IN connector
Rear
Shoulder strap fitting
4
AUDIO OUT CH-1/CH-2 connectors
1
TC OUT connector
8
AUDIO IN CH-1/
CH-2 connectors and
input selection switches
9
EARPHONE connector
5
Camera connector
6
S VIDEO OUT connector
7
VIDEO OUT connector
2
TC IN connector
