Doc. 000873, Rev. A
Sony DSC-V1
www.remotereality.com
Page 2 of 2
R
EMOTE
R
EALITY
4 Technology Drive
Westborough, MA 01581
866-898-1010
Camera
Guide
•
Sharpness:
Set the image sharpness value to NORMAL.
•
Saturation:
Set the image saturation value to NORMAL.
•
Contrast:
Set the image contrast value to NORMAL.
•
Self-Timer:
Select the self-timer by pressing the bottom arrow on the
control button. Pressing the bottom arrow again will shut the timer off.
Recommended Camera Settings for 360PLUS
When taking 360x360 images, follow all of the above instructions, and the
additional instructions below.
Because the 360Plus uses 4 images, it is best to make sure that all 4
images have the same exposure. This will ensure the end result will have
a continuous tone and density throughout the image. The best way to do
this is to:
•
Look at the aperture and shutter speed settings shown in the lower
left of the LCD screen. If the numbers change while shooting the 4
360 images needed for a 360x360, then the exposure is changing
between shots. Try to make the scene as evenly balanced with the
same type of light as possible. For example, close window shades
and turn on interior lights.
•
You can also try pushing the AE lock button (located above the
LCD screen). This will keep the exposure setting from changing
between shots, but you must push the AE lock button after each
shot so the exposure will lock for all four shots.
•
When processing 360Plus images in the RemoteReality software,
use the
Sony DSC-S70
camera setting.