2-10
DSC-P8
2-13.BARRIER UNIT
[BARRIER OPERATION TEST METHOD]
After the barrier unit is replaced, check the following items with turning the power of the set ON/OFF.
• The lens moves out and the barrier shutters open completely when the power is turned on.
• The lens moves in and the barrier shutters close completely when the power is turned off.
Checking condition is
1
downward
2
45
°
downward
3
horizontal
4
45
°
upward
5
upward; totally five positions
and check three times for each position.
The test needs to be performed only when the barrier unit is replaced.
No performance of this test is needed when the lens is replaced.
1
downward
2
45
°
downward
3
horizontal
4
45
°
upward
5
upward
3X
3X
3X
3X
3X
1
Switch on a power supply.
3
Switch off a power supply by taking out a battery
or cut off a power supply from AC daptor.
(without using camera's power swich)
4
Pinch
A
portion with finger
and fit a driver over a hollow.
A
2
Push zoom button and transform the lens
as shown below.
5
Ornamental fixed plate (A)
7
Barrier unit
6
Two screws
(M1.4
×
4.5)
Summary of Contents for DSC-P8 - Cyber-shot Digital Still Camera
