DSC-HX60/HX60V
4-11
8. Remove the Gear B.
9. Remove the Gear A.
10. Remove the Gear WH.
11. Remove the two screws to detach the DC Motor Worm Assy.
Screws
DC Motor Worm Assy
Gear B
Gear A
Gear WH
12. Insert the Gear B and turn it clockwise to set the lens unit in the TELE end state.
Note:
Turn the Gear B to the maximum.
13. Release the flexible board from the boss and pull the Flexible Board out of the hole.
Boss
Flexible Board
Hole
Flexible Board
Gear B
